Table of Contents
Advertisement
a)
Fig. 28. Arm in transport position. Placing warning plate and lights on the machine
The arm is connected to tractors on rear 3-point linkage. Machine driving on public road must
be in transport position (Fig. 28) and hold proper marking. Transport position is when flail head is set
nearest possible to tractor's axis (width is minimal). Inner extension arm (cylinder 2) is protected
against hydraulics failure – with special rupture valve (Fig. 29) – (42) and additionally with oil flow
regulator (Fig. 29) – (43). For transport time cylinder rod should additionally be protected with
channel lock. Moreover the tractor must be equipped with warning triangle, as well as yellow
flashing light mounted on the cabin's roof (at street side). Warning plate with white and red stripes
equipped with a light on right side should also be mounted.
Fig. 29. Actuator hydraulic lock and choke valve in extension arms KWT 550/650, CAMEL 900,
CAUTION:
For transportation of outrigger close valve (Z) (Fig. 30) – applies to: KWT
550 E, KWT 650 E.
Operator's manual
2
Koliber 400/450
- 32 -
Arm
Flail head
b)
42
43
Advertisement
Table of Contents
