Voltage Selector Setting And Notes - Sony PetaSite DMS-B150L Installation Manual

6-8. Voltage Selector Setting and Notes

6-8. Voltage Selector Setting and Notes
n
Before turning on the power, check the setting of the
voltage selector. If the setting is not correct, the machine
may be damaged.
The voltage selector is set to 240 V at the plant, but its
setting should be changed in some areas.
Set the voltage if required. The following five mode
voltages can be set by the voltage selector.
100 V For J
120 V For UC
220 V For EK
230 V
240 V
1. How to Set the Voltage Selector
n
The voltage selector is installed on the VS-61 board.
6-42
1. Setting the voltage selector
Connect the harness connectors to the connectors of
CN2 to CN6 on the VS-61 board and set the voltage
values.
Input Voltage (V AC)
100 V
120 V
220 V
230 V
240 V
VS-61 board
VS-61 board (CN No.)
CN2
CN3
CN4
CN5
CN6
CN4 CN3
220V 120V
CN5 CN2
230V 100V
CN6
CN1
240V
VS-61 board
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S