Sony PetaSite DMS-B150L Installation Manual page 76

6-9. Installation of the Tape Drive
If the reference pins are caught, do the following
adjustment.
1 Loosen the eight screws (PWH4 x 8) fixing the drive
stage, push in the drive stage, then tighten the loosened
eight screws. In this status, open and close the drive
stage. If the reference pins are still caught, do step 2.
PWH4 x 8
2 Loosen the eight hexagonal head cap bolts (M4 x 8)
fixing the right and left stage side panels to the rails,
push into the drive stage, then fix the bolts.
M4 x 8
M4 x 8
(10) Pull out the drive stage again and install the VTR.
6-50
PWH4 x 8
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S