Installation Of The Dmsa-At80 - Sony PetaSite DMS-B150L Installation Manual

6-11. Installing the Package Supporting Equipment

6-11-4. Installation of the DMSA-AT80

1. Remove the screw1 to the screw3 of the seven
screws (PWH4 x 8) fixing the top plate of the DMS-
B80L/B110S, and fix the seven hexagonal head cap
bolts M4 x 12 (with frange) tentatively that are
supplied with the DMSA-AT80.
PWH4 x 8
3
3
2
2
2. Install the PC bracket R (80) by aligning it with the
two pieces of the screw1 that are tentatively fixed in
step 1. Then slide it in the direction of arrow A and
tighten the screws finally.
3. Install the PC bracket M (80) by aligning it with the
three pieces of the screw2 that are tentatively fixed in
step 1. Then slide it in the direction of arrow B and
tighten the screws finally.
4. Install the FC bracket by aligning it with the two
pieces of the screw3 that are tentatively fixed in step
1. Then slide it in the direction of arrow C and tighten
the screws finally.
FC bracket (80)
3
C
3
B
2
6-68
Hexagonal head
cap bolt M4 x 12
(with flange)
2
1
1
PC bracket M (80)
PC bracket R (80)
2
2
A 1
1
5. Install the cable clamp 2 with the two screws at the
two locations.
Cable clamp 2
B4 x 5
B4 x 5
6. Install it on the side of the DMS-B80L/B110S main
unit tentatively with the three screws.
DMS-B80L/110S
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
B4 x 5
Cable clamp 2
B4 x 5
PWH4 x 8
PWH4 x 8
PWH4 x 8