Setting The Security Function - Sony Vaio VGP-UHDM10 Operating Instructions Manual

Setting the security function

Notes
• Do not disconnect the USB cable when the wireless keys are being registered.
• Be sure that the computer is not in power save mode when the wireless keys are being
registered.
• You need to register both wireless keys.
1
2
3
14
Turn on the computer and connect the drive using the USB
cable (page 10).
Press the REGIST button.
The blue light of the wireless key receiver flashes.
z
Tip
If you do not touch the wireless key receiver with a wireless key for more than 5
seconds, the blue light of the wireless key receiver will go out and the previous
status returns.
Touch the wireless key receiver with one of the wireless
keys.
The blue light of the wireless key receiver goes out for one second,
then the wireless key is registered to the drive.