Removal And Installation Of The Cabinets - Sony PetaSite DMS-B150L Installation Manual

6-2. Removal and Installation of the Cabinets

6-2. Removal and Installation of the
Cabinets
If there is not enough space to install the parts, remove the
cabinets or covers from the basic console.
The procedure is explained using DMS-B150L/B210S as
an example. Procedure of the DMS-B80L/110S remains
the same.
n
Store the removed parts to avoid scratches or damage.
1. Drive stage panel
Removal
1. Loosen the four screws (with drop-safe) and open the
drive stage panel.
n
These screws have drop-safe washers. Do not remove the
screws forcibly.
6-2
RK4 x 40 (with drop-safe)
Drive stage panel
2. While pulling down portion A shown in the illustration
in the direction of the arrow, remove upward the drive
stage panel from the pin on portion B. Then, pull out
the panel from the console.
n
Be careful not to drop the φ 6 poly washer. If it is
dropped, insert it into the pin of portion B as shown in
the figure.
Drive stage
panel
Portion B
Installation
Reattach the drive stage panels in reverse order of disas-
sembling.
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Portion A
Drive stage
panel
φ 6 poly washer