Mac Authentication - ZyXEL Communications LTE Series User Manual

The following table describes the labels in this screen.
Table 24 Wireless > General: More Secure: WPA2-PSK
LABEL
Security Level
Security Mode
Generate
password
automatically
Password
more...
Encryption
Timer

6.3 MAC Authentication

Configure the Zyxel Device to give exclusive access to specific devices (Allow) or exclude specific
devices from accessing the Zyxel Device (Deny) based on the device(s) MAC address. Every Ethernet
device has a unique MAC (Media Access Control) address. It is assigned at the factory and consists of
six pairs of hexadecimal characters; for example, 00:A0:C5:00:00:02. You need to know the MAC
addresses of the device(s) you want to allow/deny to configure this screen. Edit the list in the table to
decide the rule of access on device(s).
Chapter 6 Wireless
DESCRIPTION
Select More Secure to enable WPA2-PSK data encryption.
WPA2-PSK is the default security mode.
Select this option to have the Zyxel Device automatically generate a password. The password
field will not be configurable when you select this option.
Select Generate password automatically or enter a Password.
The password has two uses.
1. Manual. Manually enter the same password on the Zyxel Device and the client. Enter 8-63
ASCII characters or exactly 64 hexadecimal ('0-9', 'a-f') characters.
2. WPS. When using WPS, the Zyxel Device sends this password to the client.
Note: Enter 8-63 ASCII characters only. 64 hexadecimal characters are not accepted
for WPS.
Click the Eye icon to show or hide the password for your wireless network. When the Eye icon is
slashed , you'll see the password in plain text. Otherwise, it's hidden.
Click this to show more fields in this section. Click this
AES is the default data encryption type, which uses a 128-bit key.
This is the rate at which the RADIUS server sends a new group key out to all clients.
LTE Series User's Guide
66
to hide them.