Ip Passthrough - ZyXEL Communications LTE Series User Manual

The following table describes the labels in this screen.
Table 20 Network Setting > Broadband > Cellular PLMN > Manual Scan
LABEL
#
Status
Name
Type
PLMN
Apply
Cancel
Select from the network list and click Apply.

5.8 IP Passthrough

Enable IP Passthrough to allow Internet traffic to go to a LAN computer behind the Zyxel Device without
going through NAT.
Click Network Setting > Broadband > Cellular IP Passthrough to display the following screen.
Note: This screen is not available when the fourth LAN port acts as an Ethernet WAN port. See
Table 1 on page 13
Figure 42 Network Setting > Broadband > Cellular IP Passthrough
Note: Changing the IP Passthrough settings may affect the network setting of client devices.
After selecting to enable the following warning appears. Click OK to continue.
Chapter 5 Broadband
DESCRIPTION
Click the radio button so the Zyxel Device connects to this ISP.
This shows Current to show the ISP the Zyxel Device is currently connected to.
This shows Forbidden to indicate the Zyxel Device cannot connect to this ISP.
This shows Available to indicate an available ISP your Zyxel Device can connect to.
This shows the ISP name.
This shows the type of network the ISP provides.
This shows the PLMN number.
Click Apply to save your changes back to the Zyxel Device.
Click Cancel to exit this screen without saving.
for the feature differences of the Zyxel Devices.
LTE Series User's Guide
60