3.4 WiFi Setup
Turn WiFi on or off. If you keep it on, record the WiFi Name and Password in this screen so you can
configure your wireless clients to connect to the Zyxel Device. If you want to show or hide your WiFi
password, click the Eye icon (
Click Done.
Figure 20 Wizard - Wireless
Note: You can also enable the wireless service using any of the following methods:
Click Network Setting > Wireless to open the General screen. Then select Enable in the
Wireless field. Or,
Press the WiFi button located under the RESET button (see
the location and for how long the wireless function is turned on) for one second.
3.5 Quick Start Setup-Finish
Your Zyxel Device saves your settings and attempts to connect to the Internet.
Chapter 3 Quick Start
).
LTE Series User's Guide
35
Section 1.5.4 on page 23
for