Add/Edit Port Forwarding - ZyXEL Communications LTE Series User Manual

Table 44 Network Setting > NAT > Port Forwarding (continued)
LABEL
Translation Start
Port
Translation End
Port
Protocol
Modify

9.2.2 Add/Edit Port Forwarding

Create or edit a port forwarding rule. Specify either a port or a range of ports, a server IP address, and a
protocol to configure a port forwarding rule.Click Add New Rule in the Port Forwarding screen or the Edit
icon next to an existing rule to open the following screen.
Figure 94 Port Forwarding: Add/Edit
Chapter 9 Network Address Translation (NAT)
DESCRIPTION
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This field displays the protocol (TCP, UDP, TCP+UDP) used to transport the packets for which
you want to apply the rule.
Click the Edit icon to edit the port forwarding rule.
Click the Delete icon to delete an existing port forwarding rule. Note that subsequent address
mapping rules move up by one when you take this action.
LTE Series User's Guide
121