Reboot - ZyXEL Communications LTE Series User Manual

that you back up your configuration file before making configuration changes. The backup
configuration file will be useful in case you need to return to your previous settings.
Click Backup to save the Zyxel Device's current configuration to your computer.
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your Zyxel Device.
Table 89 Restore Configuration
LABEL
File Path
Choose File
Upload
Reset
Do not turn off the Zyxel Device while configuration file upload is in
progress.
After the Zyxel Device configuration has been restored successfully, the login screen appears. Login
again to restart the Zyxel Device.
The Zyxel Device automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 146 Network Temporarily Disconnected
If you restore the default configuration, you may need to change the IP address of your computer to be
in the same subnet as that of the default Zyxel Device IP address (192.168.1.1).
If the upload was not successful, an error screen will appear. Click OK to go back to the Configuration
screen.

28.3 Reboot

Reboot the Zyxel Device remotely without turning the power off. You may need to do this if the Zyxel
Device hangs, for example. This does not affect the Zyxel Device's configuration.
Click Maintenance > Reboot. Click Reboot to have the Zyxel Device reboot.
Chapter 28 Backup/Restore
DESCRIPTION
Type in the location of the file you want to upload in this field or click Choose File to find it.
Click this to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Click this to begin the upload process.
Click this to reset your Zyxel Device settings back to the factory default.
LTE Series User's Guide
197