Mac Authentication - ZyXEL Communications VMG8825-B Series User Manual

Table 21 Network Setting > Wireless > Guest/More AP > Edit (continued)
LABEL
Max.
Downstream
Bandwidth
BSSID
SSID Subnet
DHCP Start
Address
DHCP End
Address
SSID Subnet
Mask
LAN IP
Address
Security Level
Security Mode
Generate
password
automatically
Apply
Cancel

7.4 MAC Authentication

This screen allows you to configure the Zyxel Device to give exclusive access to specific devices (Allow)
or exclude specific devices from accessing the Zyxel Device (Deny). Every Ethernet device has a unique
MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses
of the devices to configure this screen.
Chapter 7 Wireless
DESCRIPTION
Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN in kilobits
per second (Kbps).
This shows the MAC address of the wireless interface on the VMG when wireless LAN is enabled.
Select Enable if you want the wireless network interface to assign DHCP IP addresses to the
associated wireless clients.
Specify the first of the contiguous addresses in the DHCP IP address pool.
The VMG assigns IP addresses from this DHCP pool to wireless clients connecting to the SSID.
Specify the last of the contiguous addresses in the DHCP IP address pool.
Specify the subnet mask of the VMG for the SSID subnet.
Specify the IP address of the VMG for the SSID subnet.
Select More Secure (WPA(2)-PSK) to add security on this wireless network. The wireless clients
which want to associate to this network must have same wireless security settings as the VMG.
After you select to use a security, additional options appears on this screen.
Or you can select No Security to allow any client to associate this network without any data
encryption or authentication.
See Section 7.2.1 on page 99
Select this option to have the VMG automatically generate a password. The password field will
not be configurable when you select this option.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
VMG8825-B Series User's Guide
for more details about this field.
103