Safety Instructions - Siemens SED2 VFD NEMA Operating Instructions Manual

Safety Instructions

The following general guidelines are provided for your safety, to prevent damage, and to
extend the service life of the SED2 product and any connected equipment. Read this
information carefully. Specific Warnings, Cautions, and Notes are provided in the relevant
sections of this manual.
WARNINGS:
•
The SED2 uses hazardous voltages and controls potentially dangerous rotating
mechanical parts. Non-compliance with warnings or failure to follow the instructions
contained in this manual can result in loss of life, severe personal injury, or serious
damage to property/equipment.
•
Only authorized personnel should work on this equipment, and only after becoming
familiar with all local regulations and ordinances; safety notices; and installation,
operation, and maintenance procedures in this manual. Successful and safe
operation of this equipment depends upon its proper handling, installation, operation,
and maintenance.
•
Before carrying out any installation and commissioning procedures, you must read all
safety instructions and warnings, including all warning labels attached to the
equipment. Make sure that the warning labels are kept in a legible condition and
ensure missing or damaged labels are replaced.
•
Observe the regulations of Safety Code VBG 4.0 (in particular, "Permissible
Deviations when Working with Live Parts") whenever measuring or testing is
performed on live equipment. Also, use suitable NEMA Type 3R/3RHE Bypass and
SED2 tools.
•
Use this equipment for only the purpose specified by the manufacturer. Unauthorized
modifications and the use of spare parts and accessories that are not sold or
recommended by the manufacturer of the equipment can cause fires, electric shocks,
and injuries.
•
Prevent the general public from accessing or approaching this equipment.
NOTE:
Siemens Building Technologies, Inc.
Keep these Operating Instructions near the equipment and available to all users.
Safety Instructions
3