Siemens SED2 VFD NEMA Operating Instructions Manual page 5

NOTICE
The information contained within this document is subject to change without notice and should not be construed as a
commitment by Siemens Building Technologies, Inc. Siemens Building Technologies, Inc. assumes no responsibility
for any errors that may appear in this document.
All software described in this document is furnished under a license and may be used or copied only in accordance
with the terms of such license.
WARNING
The Siemens Building Technologies SED2 Variable Frequency Drives are shipped without EMC line filters. (The EMC
filter is most commonly used in Europe.) Where local codes or customer/installation requirements dictate, separately
orderable Class A line filters are available. More stringent Class B line filters are also available for most models.
Installation of these filters satisfies the requirements for the EU's EMC directive.
SERVICE STATEMENT
Control devices are combined to make a system. Each control device is mechanical in nature and all mechanical
components must be regularly serviced to optimize their operation. All Siemens Building Technologies, Inc. branch
offices and authorized distributors offer Technical Support Programs that will ensure your continuous, trouble-free
system performance.
For further information, contact your nearest Siemens Building Technologies, Inc. representative.
CREDITS
Product or company names mentioned herein may be the trademarks of their respective owners.
Copyright © 2009 by Siemens Building Technologies, Inc.
TO THE READER
Your feedback is important to us. If you have comments about this manual, please submit them to
sbt_technical.editor.us.sbt@siemens.com
Printed in the U.S.A.