Setting The Alarm Function; Setting The Post-Meal Alarm (Pp2 Alarm); Setting The Time Alarms (Alarm 1 - 3) - i-SENS CareSens N User Manual

Setting the Alarm Function

Four types of alarms can be set in the CareSens N Meter: one post-
meal alarm (PP2 alarm) and three time set alarms (alarm 1 - 3).
The PP2 alarm goes off 2 hours after setting the alarm. The alarms
ring for 15 seconds and can be silenced by pressing , or S
button or by inserting a test strip.

Setting the Post-meal Alarm (PP2 Alarm)

Step 1 Setting the PP2 Alarm On
Without inserting a test strip,
press and hold the button for
3 seconds to set the post-meal
alarm. PP2, the symbol and On
will be displayed.
The screen will then
automatically change to the
memory check mode. At this
time, the symbol, indicating that the PP2 alarm has been set,
will be displayed on the screen.
Step 2 Setting the PP2 Alarm OFF
To turn off the PP2 alarm, press
and hold the button for 3
seconds. PP2, the symbol and
OFF will appear on the screen.
Then the screen will change
automatically to the memory
check mode without symbol
displayed.
36 www.i-sens.com

Setting the Time Alarms (Alarm 1 - 3)

Step 1
Without inserting a test strip, press and the S
button simultaneously for 3 seconds to enter the
time alarm mode. While OFF blinks on the screen,
alarm 1 will be displayed.
Step 2
On pressing , alarm 1 is set and On is displayed
on the screen. Press again to cancel alarm 1
and OFF will blink on the screen.
Step 3
Press to adjust the hour of alarm 1.
A number representing the hour will blink on
the screen. Press to set the hour. Press to set
the minute.
symbol disappears
www.i-sens.com 37