Viewing Test Results; Setting The Alarm Function; Setting The Time Alarms (Alarm 1-5) - i-SENS VetMate Owner's Booklet

Viewing Test Results

Step 1
Press the ▲ or S button to turn the
meter on. The current date and time
will be displayed on the bottom of
the screen for 2 seconds. A 14-day
average value for your dog assigned
to 'no1' will be followed.
Step 2
Use the ▼ button to scroll
through the test results,
starting from the most
recent and ending with the
oldest. Press the ▼ button
to return to the result seen
previously. After checking
the stored test results, press
the S button to turn off the
meter.
34 www.i-sens.com
▼button
▲button

Setting the Alarm Function

Five time-set alarms (alarm1–5) can be set in the VetMate meter:
Setting the Time Alarms (Alarm 1–5)
Step 1
Without inserting a test strip, press the ▲
and S buttons simultaneously for 3 seconds
to enter time alarm mode. 'alarm1' will be
displayed while 'OFF' blinks on the screen.
Step 2
On pressing the ▼ button, 'alarm1' is set and
'On' is displayed on the screen. Press the ▼
button again to cancel 'alarm1' and 'OFF' will
blink on the screen.
Step 3
Press the ▲ button to adjust the time of
'alarm1' .
A number representing the time will blink
on the screen. Press the ▼ button to set
the time.
www.i-sens.com 35