Caresens N Blood Glucose Meter Display; Setting Up Your System; Adjusting The Date And Time - i-SENS CareSens N User Manual

CareSens N Blood Glucose Meter Display

mem
appears when test
results stored in
the memory are
displayed
alarm
appears when the
time alarm has been
set
Battery symbol
indicates meter
battery is running
low and needs to be
replaced
Post-meal test mark
appears during post-
meal testing and
when post-meal test
results are displayed
Month
Alarm symbol
appears when the
Day
post-meal alarm has
been set
mmol/L
unit for measuring
blood glucose
Note: The unit of measurement for your CareSens N Meter is
preset and fixed in mg/dL.
12 www.i-sens.com
Mute symbol
appears only when
the sound is set to
OFF
check
appears when test
results have not been
saved
Test results
test results displaying
panel
Decimal point
appears when the
blood glucose
measuring unit is set
to mmol/L
mg/dL
unit for measuring
blood glucose
Hour
Blood insertion
Minute
symbol
indicates meter
is ready for the
application of a drop
of blood or control
solution

Setting Up Your System

You should check and update the meter-settings such as time and
date before using your meter or after changing the meter batteries.
Press and hold the S button for 3 seconds to enter the SET mode.
While you are setting the meter, current settings will appear on the
display. Press and hold to scroll faster. Whenever you want to
complete the settings and exit from the SET mode, press and hold
the S button for 3 seconds again.

Adjusting the Date and Time

Step 1 Entering the SET Mode
Press and hold the S button for 3 seconds. After
all the segments flash across the screen, SET
is displayed on the screen. Press the S button
again to progress to the next step.
Step 2 Setting the Year
Press or button until correct year appears.
Press and hold to scroll faster. After setting the
year, press the S button to confirm your selection
and progress to the next step.
www.i-sens.com 13