Preparing The Meter And Test Strip; Flagging Post-Meal Test Results - i-SENS CareSens N User Manual

Step 5
Cock the lancing device by holding the
body in one hand and pulling on the
sleeve with the other hand until the
device clicks.
Note: The skin depth to retrieve samples will vary for various
people at different sample sites. The lancing device's adjustable
tip allows the best depth of skin penetration for an adequate
sample size. A beginning setting of three (3) is recommended.

Preparing the Meter and Test Strip

Step 6
Insert a test strip with the contact bars facing up into the
meter's test strip port. Push the strip gently into the strip port
until the meter automatically turns on and the
appears.

Flagging Post-meal Test Results

CareSens N Meter allows you to flag a result of a post-meal
test with symbol. The post-meal flag ( ) can be attached
and deleted just before applying the blood sample. Once the
test result is saved with the post-meal flag ( ), it cannot be
deleted.
24 www.i-sens.com
Step 7
If you want to attach a post-meal flag ( ) to a
test result, press and hold the button for 3
seconds after inserting the test strip.
The post-meal flag ( ) and the
will appear on the screen. The test result will
also be displayed with the post-meal flag ( ).
If you do not want to save the result as a post-
meal test, move on to Step 8 after Step 6. If
you want to delete the post-meal flag ( ) that
you attached, press and hold the button for
3 seconds again before applying the blood
sample.
symbol
symbol
www.i-sens.com 25