Setting The Sound On/Off; Setting The 'Test Result Reset - i-SENS CareSens N User Manual

Setting the Sound On/OFF

Step 8
On pressing or , the screen will display the
On or OFF. Press the S button to confirm the
selection. The meter will beep in the following
instances if set to On.
• When you push the S button or button to
turn on the meter
• When the test strip is inserted in the meter
• When the blood sample is absorbed into the
test strip and the test starts
• When the test result is displayed
• When you push the button to set the post-
meal (PP2) alarm
• When it is time for a preset blood glucose test
If the sound is set to OFF, none of the sound
functions will work. After setting the sound,
press the S button to progress to the next step.
Note:
symbol is displayed only when the sound is set to
OFF.
16 www.i-sens.com

Setting the 'Test Result Reset'

(Deleting all the saved test results)
Step 9
In this mode all the test results stored in the meter can be deleted.
Please note that if you select YES, all the stored test results will be
deleted and can not be restored.
After the beeper mode is set,
press the S button to enter the
'Test Result Reset' mode. The
'dEL' character will blink on the
screen. Press or to alternate
between 'YES' or 'no' .
To delete all the stored test
results press the S button while
the screen displays 'YES' . Then, all the test results stored in the
meter will be deleted and the screen will be similar to the picture
on the right.
If you do not want to delete the results press the S button while
the screen displays 'no' . Then, the screen will return to step 2 (See
page 13).
Note: At any stage, if the S button is pressed for 3 seconds, Time
and Date will finish and the meter will be turned off. Press and
hold to scroll through numbers quickly.
www.i-sens.com 17