Setting The Sound On/Off; Setting The Vet Mode (Animal Mode) - i-SENS VetMate Owner's Booklet

Step 6 Setting the Hour
Press the ▲ or ▼ button until the correct
hour appears. After the hour is set, press
the S button to go to the next step.
Step 7 Setting the Minute
Press the ▲ or ▼ button until the correct
minute appears. After setting the minute,
press the S button to go to the next step.

Setting the Sound On/OFF

Step 8
On pressing the ▲ or ▼ button, the screen
will display On or OFF. Press the S button to
confirm the selection.
The meter will beep in the following
instances if set to On:
• When the test strip is inserted in the
meter,
16 www.i-sens.com
• When the blood or control solution sample
is absorbed into the test strip and the test
starts,
• When the test result is displayed,
• When you press the S or ▲ button to turn on
the meter,
• When it is time for a preset blood glucose
test.
If the sound is set to OFF, none of the sound
functions will work. After setting the sound,
press the S button to go to the next step.
Note:
The symbol is displayed only when the sound is set
to OFF.
Setting VET Mode (Animal Mode)
Step 9
In this setting, Vet mode can be selected; dogs or cats.
On pressing the ▲ or ▼ button, the screen will display the
symbol. Press the S button to confirm the setting.
or
www.i-sens.com 17