General Safety Instructions - Flomec QS200 Product Owners Manual

GENERAL SAFETY INSTRUCTIONS

4
Find Quality Products Online at:
IMPORTANT: It is your responsibility to:
• Ensure that all equipment operators have access to adequate
instructions concerning safe operating and maintenance procedures.
This product is not approved for use with
petroleum products (diesel fuel, unleaded
gasoline, jet fuel, kerosene, etc.), aromatic hydrocarbons or other
incompatible chemicals
This product is not approved for use in hazardous
locations.
When applying power, adhere to specifications
listed in appropriate electronics manual.
Disconnect external power before attaching or
detaching input or output wires.
NOTE: Be sure O-rings and seals are kept in good repair.
Compatibility of this product's material and the
process fluid and/or environment should be
considered prior to putting into service.
Product should never be operated outside its
published specifications for temperature or
pressure. See specifications for your model.
Make sure flow and pressure have been eliminated
from process pipe prior to installing or removing
product.
Installation near high electromagnetic fields and
high current fields is not recommended and may
result in inaccurate readings.
Do not allow water to freeze in meter. Ice
expansion may burst the plastic housing.
Do not allow this meter to be used with steam.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com