General Safety Instructions - Flomec QS200 Product Owners Manual

GENERAL SAFETY INSTRUCTIONS

IMPORTANT: It is your responsibility to:
• Ensure that all equipment operators have access to adequate
instructions concerning safe operating and maintenance procedures.
gasoline, jet fuel, kerosene, etc.), aromatic hydrocarbons or other
incompatible chemicals
NOTE: Be sure O-rings and seals are kept in good repair.
considered prior to putting into service.
pressure. See specifications for your model.
product.
result in inaccurate readings.
4
This product is not approved for use with
petroleum products (diesel fuel, unleaded
This product is not approved for use in hazardous
locations.
When applying power, adhere to specifications
listed in appropriate electronics manual.
Disconnect external power before attaching or
detaching input or output wires.
Compatibility of this product's material and the
process fluid and/or environment should be
Product should never be operated outside its
published specifications for temperature or
Make sure flow and pressure have been eliminated
from process pipe prior to installing or removing
Installation near high electromagnetic fields and
high current fields is not recommended and may
Do not allow water to freeze in meter. Ice
expansion may burst the plastic housing.
Do not allow this meter to be used with steam.