Advertisement
Quick Links
SAVE THESE INSTRUCTIONS
QM Series Positive Displacement Fuel Meter
Owner's Manual
TABLE OF CONTENTS
General Information ���������������������������2
Installation �����������������������������������������3
Operation �������������������������������������������4
Calibration �����������������������������������������5
Maintenance ��������������������������������������5
Troubleshooting ���������������������������������6
Specifications ������������������������������������7
Informative Table - Diesel ����������������� 8
Informative Table - Unleaded ����������� 9
Illustrated Parts List �������������������������10
Parts and Service ����������������������������15
Great Plains Industries, Inc� is a member
of the Petroleum Equipment Institute.
11/2020
To the owner...
Congratulations on receiving your
FLOMEC® QM150/QM240 or GPRO®
QM40 Meter� We are pleased to provide
you with a meter designed to give you
maximum reliability and efficiency�
Our business is the design, manufacture
and marketing of liquid handling,
agricultural and recreational products� We
succeed because we provide customers
with innovative, reliable, safe, timely and
competitively-priced products� We pride
ourselves in conducting our business with
integrity and professionalism�
We are proud to provide you with a
quality product and the support you need
to obtain years of safe, dependable
service�
Victor Lukic, President
Great Plains Industries, Inc�
921528-01 Rev. E
Advertisement
Related Manuals for Flomec GPRO QM Series
Summary of Contents for Flomec GPRO QM Series
-
Page 1: Table Of Contents
Owner’s Manual To the owner… TABLE OF CONTENTS Congratulations on receiving your General Information ���������������������������2 FLOMEC® QM150/QM240 or GPRO® Installation �����������������������������������������3 QM40 Meter� We are pleased to provide Operation �������������������������������������������4 you with a meter designed to give you Calibration �����������������������������������������5 maximum reliability and efficiency�... -
Page 2: General Information
GENERAL INFORMATION 1. Appropriate Use of QM Meter: a� The UL Approved version of The purpose of this manual is to this meter is for use only with assist you in installing, operating and thin viscosity petroleum fuels maintaining your mechanical fuel meter� such as gasoline, gasoline- Please take a few moments to read ethanol blends (E15 maximum),... -
Page 3: Installation
INSTALLATION Liquid can flow in a horizontal direction, or a vertical direction, but in each case Before installing your meter, review the rotor shafts must be in a horizontal the safety instructions given above� plane� Examine your meter to make sure It is preferred to install the flow-meter there are no visible signs of shipment upstream of a flow control or shut-off... -
Page 4: Operation
Changing Display Orientation 2� Wrap threaded male connections with thread tape or use a pipe 1� The mechanical display case can sealant compound compatible with be removed, rotated and reinstalled petroleum fuels� for easy reading with either horizon- 3� Install the meter on the pump us- tal or vertical flow�... - Page 5 QM40 Modular Configurations outlet adapter/o-ring/bolts The QM40 includes adapter plates, o-rings, and bolts for use with threaded pipe. figure 4a inlet adapter/o-ring/bolts ----------------------------------------------------------------------------------- outlet adapter/o-ring/bolts Without the inlet adapter plate, the QM40 can be bolted directly to the outlet of a GPI or GPro pump featuring a modular outlet.
-
Page 6: Calibration
at regular intervals, especially if reduced CALIBRATION flow is encountered� Clean or Replace Strainer The meter is accurately calibrated at the factory for use with diesel fuel� Due to 1� Remove the socket screws at the differences in viscosity and flow rates, inlet fitting�... -
Page 7: Troubleshooting
TROUBLESHOOTING Symptom Probable Cause Corrective Action A� Meter counter does Broken counter Replace counter� not operate� (Normal assembly� fuel flow) Counter alignment Look for loose or missing fasteners, bent or misaligned parts� Foreign material in Remove and clean counter assembly� counter assembly�... -
Page 8: Specifications
SPECIFICATIONS Gallon Models Litre Models Model QM240N or QM40-G8N QM150N or QM40-L8N Designation Unit of Measure U�S� Gallon Litre Flow Range 2 to 40 GPM 8 to 150 LPM Diesel: ±0�5% (15-30 GPM/57-113 LPM) ±1�0% all other flowrates Typical Accuracy (Factory Set) Unleaded: +0�5% to -1�5% (15-30 GPM/57-113 LPM) ±2�0% all other flowrates... - Page 11 NOTES:...
-
Page 16: Parts And Service
CAUTION PARTS AND SERVICE Do not return meters or parts For warranty consideration, parts, without specific authority from the or other service information, contact GPI Customer Service Department� your local distributor� If you need Due to strict regulations governing further assistance, please contact GPI Customer Service Department shipment of flammable liquids, in Wichita, Kansas during normal... - Page 17 Some models are not UL Listed. Check your model for UL label if in doubt. © 2019 GREAT PLAINS INDUSTRIES, INC. All Rights Reserved. FLOMEC and GPRO are registered trademarks of Great Plains Industries, Inc. 11/2020 921528-01 Rev. E...
Need help?
Do you have a question about the GPRO QM Series and is the answer not in the manual?
Questions and answers