Hardware Configuration Menu - FLIR SeaFLIR II Series Operator's Manual

Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
3.2.5

Hardware Configuration Menu

The Hardware configuration Menu (Figure 3-18) is used to identify to the
SeaFLIR II Imaging System the GPS device installed, configure the
SeaFLIR II Imaging System to receive the host platform's National
Maritime Electronics Association (NMEA) radar inputs for the Radar
Bearing Mode of operation.
GPS device
and configure system for correct GPS input.
RBH device
and configure the SeaFLIR II Imaging System for the correct radar
inputs.
Orientation
platform the SeaFLIR II Imaging System is installed on. Set Ball up for
surface vessel. Set Ball down for aircraft.
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
– Selects menu to identify host platform's GPS device
– Selects menu to identify host platform's NMEA device
– Used by the user to select gimbal orientation for the
Figure 3-18. Hardware configuration Menu
Requested by Bower, Richard
39
Uncontrolled : 4256
Retrieval Date:07-Dec-10