Auto Level Switch; Tracker Window Control; Shift Switch - FLIR SeaFLIR II Series Operator's Manual

Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
3.1.17

Auto Level Switch

This switch turns the auto level on and off. When used with the CCD
camera both Level and Gain are activated simultaneously.
3.1.18

Tracker Window Control

This control is used to manually adjust the size of the tracker window.
3.1.19

SHIFT Switch

Pressing the SHIFT switch will cause SHIFT to appear on the left side of
the display (Figure 3-3). Pressing a shifted function switch immediately
after pressing the SHIFT Switch will cause the system to perform the
shifted function (Table 3-1). Pressing the SHIFT Switch, a second time
without pressing a shifted function switch will cancel the SHIFT mode.
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
Figure 3-3. SHIFT Display
23
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard