System Power Information - FLIR SeaFLIR II Series Operator's Manual

Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
Imaging System. This design is ergonomic and user-friendly for both
right and left hand operators.
employing natural contours and easily reached buttons to activate the
different functions. All controls are located to allow the operator to grasp
the unit and use the fingers to operate the controls. The unit has an
adjustable hand strap to prevent it from slipping out of the operator's
grasp in confined areas. The HCU is provided with an expanding coiled
cord to protect against "tugging" on the connector.
connected directly to the CEU for system operation. HCU characteristics
are listed in Table 1-8.
1.5

System Power Information

The CEU receives a nominal +28VDC from the host and distributes the
voltage to the SGA.
Anti-Ice electrical power is provided directly to the SGA from the
host.
below 32°F.
Input Voltage
Maximum Current
Valid on Day of Issue only.
Document will not be updated
Table 1-8. Hand Control Unit Characteristics
Parameter
Weight
Size
Cord Length
Type
The Anti-Ice should only be used when the SGA is
Table 1-9. System Power Characteristics
Parameter
CM Ref:4049
The HCU is a multifunctional device
Characteristic
2.3 lbs.
3.5" D x 6.7" H x 5.0" W
10' max.
Analog; digital
NOTE:
Characteristic
+28VDC (nominal)
+18VDC to +32VDC
15 amperes w/o Anti-Ice
30 amperes with Anti-Ice
12
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard
The HCU is