Initial Setup Menu - FLIR SeaFLIR II Series Operator's Manual

Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
3.2.2

Initial Setup Menu

This Initial setup Menu (Figure 3-10) allows the Operator to 'personalize'
the SeaFLIR II Imaging System with a variety of functions selectable
through the HCU.
Factory defaults setting (restore option). Returns the system to the
following factory default settings.
Auto-null [ ]
SG Reverse [ ]
Auto-slew [b]
Advanced mode [ ] (off)
Helicopter
Agency name – Allows operator set Agency name or other identifying
information into the display.
Symbology level
Color scheme
settings.
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
Figure 3-10. Initial Setup Menu
Symbology level full
Color scheme 0
12 O'clock (no offset)
PCORR (Tracker mode)
– Selects menu to setup initial settings
– Selects menu to choose display graphic color
33
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard