Table of Contents

Advertisement

Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
Operator's Manual
Copyright © FLIR Systems, Inc. 2006. Information in this manual is
subject to change without notice. This publication or any part thereof
may not be reproduced in any form without the expressed written
permission of FLIR Systems, Inc.
This document is controlled to FLIR Technology Control Level 2.
U.S. government authorization is required prior to export. Diversion
contrary to U.S. Law prohibited. Contact FLIR Systems, Inc. Export
Compliance Department for further information.
Valid on Day of Issue only.
Document will not be updated
Imaging System
25 Esquire Road, North Billerica, MA 01862 - USA
Phone: (978) 901-8000 Fax: (978) 901-8885
P/N 18704-000 Rev. D – October 2006
CM Ref:4049
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SeaFLIR II Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FLIR SeaFLIR II Series

  • Page 1 Phone: (978) 901-8000 Fax: (978) 901-8885 P/N 18704-000 Rev. D – October 2006 Copyright © FLIR Systems, Inc. 2006. Information in this manual is subject to change without notice. This publication or any part thereof may not be reproduced in any form without the expressed written permission of FLIR Systems, Inc.
  • Page 2 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated...
  • Page 3 FLIR Systems, Inc. 16 Esquire Road North Billerica, Ma 01862 USA Phone: (978) 901-8000 Fax: (978) 901-8885 Copyright© by FLIR Systems, Inc. All rights reserved. This publication, or any parts thereof, may not be reproduced in any form without the express written permission of FLIR Systems Inc.
  • Page 4 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated...
  • Page 5 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated WARNINGS, CAUTIONS, NOTES WARNING Used to indicate a location, equipment or system where a potential hazard exists capable of producing injury to personnel if approved procedure is not followed.
  • Page 6 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated...
  • Page 7: Table Of Contents

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Table of Contents Paragraph Title Page INTRODUCTION .................1 Purpose and Scope of this Technical Manual......1 General..................1 System Capabilities..............2 1.3.1...
  • Page 8 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Table of Contents - Continued Paragraph Title Page 3.1.14 Gain Control ................22 3.1.15 Auto Gain Switch ..............22...
  • Page 9 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Table of Contents - Continued Paragraph Title Page Radar Bearing Mode ..............55 3.9.1 Basic Radar Bearing Indicators..........56 3.9.2...
  • Page 10 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated List of Figures Figure Title Page 1-1 SeaFLIR II Imaging System Units...........4 1-2 Laser Aperture Label ..............9 1-3 Laser Interlock Safety Label ............9 1-4 Laser Safety Switch (Key controlled)..........10...
  • Page 11 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated List of Figures - Continued Figure Title Page 3-36 Radar Bearing Continuous Mode Display........59 3-37 Auto-Scan Field of Regard............61 3-38 Examples of Level and Gain............65 3-39 Strain Gauge Control –...
  • Page 12 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated...
  • Page 13 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated SAFETY PAGE Warnings and Safety Precautions WARNING Class 3b laser product per ANSI Z136.1-2000 is an eye hazard if directed or reflected beam is viewed.
  • Page 14 Refer to the FLIR Interface Control Document (ICD), 18400-940. Additional service and installation information can be obtained by contacting FLIR at (978) 901-8000. Improper installation of the system will cause display problems and can damage the system components.
  • Page 15: Introduction

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated INTRODUCTION Purpose and Scope of this Technical Manual The SeaFLIR II Imaging System is equally at home on land, at sea, or in the air.
  • Page 16: System Capabilities

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated System Capabilities The SeaFLIR II Imaging System is a gyro-stabilized platform that can rotate a continuous 360 in both azimuth and elevation.
  • Page 17: Processing Capabilities

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 1.3.2 Processing Capabilities The central processing unit (CPU), located in the CEU, is based on the industry PC/104 standard.
  • Page 18 U2J16 U2J7 U2J10 U2J2 U2J1 U2J3 U2J12 U2J13 U2J14 Control Electronics Unit (CEU) Laser Pointer (Optional) Camera Lens MODE FLIR TRACKER Camera Lens POSITION Hand Control Unit Stabilized Gimbal Assembly (HCU) (SGA) C03-008 Figure 1-1. SeaFLIR II Imaging System Units...
  • Page 19: Gyro Stabilization

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Table 1-1. SGA Performance Characteristics Parameter Characteristic Gimbal type Elevation over azimuth, two axes of freedom Field of regard 360°...
  • Page 20: Directional Control

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 1.4.1.2 Directional Control Directional control is provided for both the elevation and azimuth axes through a full 360°...
  • Page 21: Optional 1.8X Extender

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 1.4.1.4 Optional 1.8X Extender The optional 1.8X Extender (available in the SeaFLIR II-C) allows the IR zoom lens to be increased to 45 through 450mm.
  • Page 22: Laser Pointer (Optional)

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated total maximum 72x zoom. Digital zoom increases the picture size and reduces resolution.
  • Page 23 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated AVOID EXPOSURE VISIBLE and/or INVISIBLE LASER RADIATION EMITTED FROM THIS APERTURE Figure 1-2.
  • Page 24 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated to extend the range of night vision goggles. The Laser Pointer is integrated with a keyed safety interlock switch (Figure 1-4) that will disable the laser, unless armed.
  • Page 25: Control Electronics Unit (Ceu)

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Table 1-6. Laser Pointer Optical Characteristics (Nominal) Parameter Characteristic Laser Type Single-mode AlGaAs laser diode Wavelength...
  • Page 26: System Power Information

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Imaging System. This design is ergonomic and user-friendly for both right and left hand operators.
  • Page 27: System Installation

    Refer to the FLIR Interface Control Document (ICD), 18400-940. Additional service and installation information can be obtained by contacting FLIR at (978) 901-8000. Improper installation of the system will cause display problems and can damage the system components.
  • Page 28 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Control Electronics Unit (CEU) U2J15 U2J16 U2J7 U2J10 U2J2 U2J1 U2J3 U2J12...
  • Page 29: Operating Instructions

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated OPERATING INSTRUCTIONS Description and Use of Controls and Indicators This section contains the descriptions and the uses of SeaFLIR II Imaging System controls and indicators.
  • Page 30 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Strain Gauge LLTV H HOLD EXIT Tracker Mode MENU Tracker On/Off Gyro Null MENU...
  • Page 31: Tracker On/Off (O/I) Switch

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.1.4 Tracker On/Off (O/I) Switch TRACKER O/I Switch is used to turn the selected Auto-Tracking mode on and off.
  • Page 32: Symbology (Sym) Switch

    “masks”. Four pieces of the graphic information are displayed at all times; Date and time, FLIR Logo, El (Elevation) and Az (Azimuth) position indicators.
  • Page 33: Symbology:full

    Crosshair in the center of the display will only be displayed when the Laser Pointer (optional) is installed. Display adjustment graphics are not displayed. In addition to the four constant graphics display (Date and time, FLIR Logo, Az and El) only the non-selectable GPS Data graphic is displayed constantly. 3.1.6.4...
  • Page 34: Laser Pointer/Null (Shifted Function) Switch

    Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Date & Time Agency Name FLIR Logo LLTV Mode Manual Gain Manual Level Auto Focus On POS Hold System Mode...
  • Page 35: Az Position Control

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated NOTE: Gyro NULL is best set with a stationary object when the system has been running for 15 minutes.
  • Page 36: Scan Control

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated RST – The RST position is used to reset the system. To place the system into the RST position requires that the push button on the back of the switch be depressed and the switch turned to the RST position.
  • Page 37: Auto Level Switch

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.1.17 Auto Level Switch This switch turns the auto level on and off. When used with the CCD camera both Level and Gain are activated simultaneously.
  • Page 38: Pos (Shifted Function) / H Hold Switch

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Table 3-1. Shifted Functions Switch + Switch Function Alternate (toggle) between Strain Gauge SHIFT + POS / H control of the SGA and the preset SGA HOLD...
  • Page 39: Strain Gauge

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Radar Bearing – Radar Bearing Handoff (RBH) Mode must be configured and selected in the Hardware config Menu.
  • Page 40 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated The NUC process should be repeated whenever the output image becomes spatially noisy as shown in the left image in Figure 3-5.
  • Page 41: Pol / Lltv Switch

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Auto Focus – Auto Focus is the default focus mode. When the FOCUS Rocker Switch is pressed Auto Focus is suspended until the ZOOM Rocker Switch is pressed which reactivates Auto Focus.
  • Page 42 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-6. White Hot Polarity Display Figure 3-7. Black Hot Polarity Display...
  • Page 43: Zoom Rocker Control

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.1.27 ZOOM Rocker Control Zoom is used to control the IR and CCD camera zoom lenses or is used in conjunction with the MENU, ADJ and EXIT Switches.
  • Page 44: Menu Mode

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-8. Auto Scan Width Adjust Display Menu Mode The SeaFLIR II Imaging System has a series of pull down menus.
  • Page 45 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Also, after ADJ is pressed, the current menu remains active, and the menu item is changed, to reflect the current value of the setting.
  • Page 46: Top Level Menu

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.2.1 Top Level Menu Auto-null Auto-null [ ] (default) – Manual Gyro null. Auto-null [a] –...
  • Page 47: Initial Setup Menu

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.2.2 Initial Setup Menu This Initial setup Menu (Figure 3-10) allows the Operator to ‘personalize’ the SeaFLIR II Imaging System with a variety of functions selectable through the HCU.
  • Page 48 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 12 O’clock set – Allows the operator to change the offset setting for the host platform Az icon (Compass Rose).
  • Page 49: Symbology Level Menu

    “masks”. The pieces of graphic information which are displayed at all times include, Date and time, FLIR Logo, El (Elevation) and Az (Azimuth) position indicators, GPS data, when available. The selectable graphic symbols (Table 3-2) will only be displayed when the operator has selected (or not selected) the respective mode or function.
  • Page 50: Platform Symbol Selection

    Symbology: MIN – Only the four constant graphics, Date and time, FLIR Logo, El (Elevation) and Az (Azimuth) position indicators are displayed. All display adjustments and all operational Mode graphics are not displayed, only the selected Tracker Mode is displayed momentarily.
  • Page 51 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-12. Platform Symbol Select Menu Figure 3-13. None Platform Symbol Figure 3-14.
  • Page 52: Platform Sga Orientation

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.2.4.1 Platform SGA Orientation The Orientation menu (Figure 3-17) is used to select and set the SGA orientation (Ball up or Ball down) using the following procedure: a.
  • Page 53: Hardware Configuration Menu

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.2.5 Hardware Configuration Menu The Hardware configuration Menu (Figure 3-18) is used to identify to the SeaFLIR II Imaging System the GPS device installed, configure the SeaFLIR II Imaging System to receive the host platform’s National Maritime Electronics Association (NMEA) radar inputs for the Radar...
  • Page 54: Gps Select Menu

    Figure 3-22. The GPS devices supported at the time of the writing of this document are identified in Figure 3-19. If your device is not identified, contact FLIR customer service for assistance (978) 901-8000.
  • Page 55: Rbh Select Menu

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-20. GPS Device Selected (No GPS Data) Figure 3-21. GPS Data Display Figure 3-22.
  • Page 56 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-23. NMEA (Radar) Select Menu Figure 3-24. Radar Configuration Menu...
  • Page 57 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-25. Baud Rate Select Menu Figure 3-26. RBH Elevation Select Menu...
  • Page 58: Color Scheme Menu

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.2.6 Color scheme Menu The Color scheme Menu (Figure 3-27) allows the user to select one of four color schemes (Figure 3-28), to suite the operator’s preference.
  • Page 59: System Start-Up Procedure

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Color Scheme 0 Color Scheme 0 Color Scheme 0 Color Scheme 3 (Gray Scale) Figure 3-28.
  • Page 60 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-29. System Power Switch Figure 3-30. System Startup Standby Display...
  • Page 61: System Reset Procedure

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated NOTE: When the System Power Switch is placed in the On position the SGA will unlock from the stowed position and will rotate to the home (POS) position.
  • Page 62: Shutdown Procedures

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Shutdown Procedures a. Turn the Power Switch to the Standby position. Ensure Standby is displayed on the left center of the tracker display.
  • Page 63: Date And Time Setup

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated The first character position of the Agency name field will be highlighted.
  • Page 64: Advanced Mode

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated c. Press ADJ Switch. d. Scroll through the Initial setup menu to Date and time. e.
  • Page 65: Auto-Tracker

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 1. Phase Correlation Mode (PCORR) (default) 2. Scene Lock Mode (SCENE) Advanced mode [a] –...
  • Page 66: Phase Correlation Mode (Pcorr)

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated depending on the circumstances. The tracker has six modes of operation (Table 3-3).
  • Page 67: Scene Lock Mode (Scene)

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.7.2 Scene Lock Mode (SCENE) The Scene Lock mode is used to hold the ‘scene’ in position without operator inputs.
  • Page 68: Centroid Black Mode (Cent Blk)

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated If the target under track is temporarily obscured by passing under a bridge or behind a tree, for example, the tracker will coast at the same speed for 2 seconds and automatically re- acquire the target when it emerges.
  • Page 69: Force Coast

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Adjust the window size with the Tracker Window thumb wheel on the HCU to a size slightly larger than the object you wish to track.
  • Page 70: Basic Radar Bearing Indicators

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.9.1 Basic Radar Bearing Indicators RAD:OFF-LINE - The radar system is off line (Figure 3-33) and no radar information is being provided to the SeaFLIR II System.
  • Page 71: Radar Bearing Single-Shot Mode

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-34. Radar Bearing Invalid Data Display 3.9.2 Radar Bearing Single-Shot Mode In Radar Bearing Single-Shot Mode the SeaFLIR II system must be set to receive a radar input but need not have Radar Bearing selected when the Radar Bearing is sent.
  • Page 72 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated displayed in the lower left side of the video display (Figure 3-36). The operator can offset (fine tune) the radar input with the Strain Gauge to center the target in the display.
  • Page 73: Operational Check

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 3-36. Radar Bearing Continuous Mode Display 3.10 Operational Check Use the following procedure to perform an operational checkout test.
  • Page 74: Auto-Scan Control

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated NOTE: The SGA will automatically rotate up to the stop position and will perform a Non-Uniformity Correction (NUC).
  • Page 75: Scan And Slew Rate

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated operator in the lower left area of the display. After selecting the SCAN width, operator repeats “SHIFT”...
  • Page 76: Ir Level

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated As the system scans in azimuth, the azimuth indicator (Az) will show the pointing direction of the SGA relative to line of travel of the host.
  • Page 77: Auto-Gain

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated accommodate scenes with small temperature range differences or scenes with very large temperature range differences. IR Gain should be set to extract the detail needed from the scene.
  • Page 78: Operating The Ccd Camera

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated b. Use the Strain Gauge point the SGA (camera lens). c.
  • Page 79 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Daylight camera picture of military vehicle approximately 80 meters distance.
  • Page 80: Strain Gauge Operation

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated 3.15 Strain Gauge Operation Refer to Figures 3-39 and 3-40 for Strain Gauge operation. Figure 3-39 shows Az control.
  • Page 81 Figure 3-39. Strain Gauge Control – Azimuth 12-Dec-2000 15:11 FLIR Systems 12-Dec-2000 15:11 FLIR Systems gimbal gimbal down push pull strain gauge strain gauge forward back Side View arrow shows of Gimbal direction of FLIR C01-355 Figure 3-40. Strain Gauge Control – Elevation...
  • Page 82 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated THIS PAGE INTENTIONALLY LEFT BLANK...
  • Page 83: Maintenance And Service Instructions

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated MAINTENANCE AND SERVICE INSTRUCTIONS Introduction The operator should perform the preventive maintenance tasks to keep the SeaFLIR II Imaging System in optimum operational condition.
  • Page 84: System Wash-Down

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Dirt, dust and salt air can reduce the thermal sensitivity of the system. After each mission, rinse sensor lens with low-pressure water to remove dust and dirt.
  • Page 85: Preparation For Shipment And Storage

    When returning the equipment to a FLIR repair facility, a Return Material Authorization (RMA) should be obtained from FLIR, with an explanation of the reason or conditions prompting the return shall be included in the shipping case.
  • Page 86 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 4-1. Power Fault Chart...
  • Page 87 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 4-2. SGA Fault Chart...
  • Page 88 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 4-3. Video/Graphic Fault Chart 1...
  • Page 89 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Figure 4-4. Video/Graphic Fault Chart 2...
  • Page 90 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated THIS PAGE INTENTIONALLY LEFT BLANK...
  • Page 91: Appendix A. Infrared Fundamentals

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated APPENDIX A. Infrared Fundamentals What does the SeaFLIR II Infrared camera see? The SeaFLIR II is a passive camera that collects Infrared light.
  • Page 92 Where do you find more information regarding Infrared light? Infraredtraining.com is the official website of the itc (Infrared Training Center). FLIR.com is also a great place to find information and links to other websites with information about the Infrared world.
  • Page 93: Appendix B. Acronyms And Abbreviations

    Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated APPENDIX B. Acronyms and Abbreviations Abbreviation Meaning Adjust Auto Focus ARPA Automatic Radar Plotting Azimuth...
  • Page 94 Commercial in Confidence CM Ref:4049 Uncontrolled : 4256 Export Level 2 Retrieval Date:07-Dec-10 Issued to: AgustaWestland Valid on Day of Issue only. Requested by Bower, Richard Document will not be updated Abbreviation Meaning Kelvin Kilobyte Latitude lbs. Pounds LLTV Low Light Television µm Micron (10 meters)

This manual is also suitable for:

Seaflir iiSeaflir ii-c

Table of Contents