Symbology:full; Symbology:2; Symbology:3; Symbology:min - FLIR SeaFLIR II Series Operator's Manual

Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
3.1.6.1
Selectable and non-selectable graphic symbols are constantly displayed
(Figure 3-2). Selectable graphics are graphics displayed because of a
specific operator initiated function:
3.1.6.2
Selectable graphics are displayed momentarily. In addition to the four
constant graphics, the non-selectable graphic for GPS Data and Tracker
Mode are constantly displayed. Crosshair in the center of the display will
only be displayed when the Laser Pointer (optional) is installed.
3.1.6.3
Operational mode graphics (LLTV Mode, POS Hold Mode, Laser Pointer
Mode (optional) and Tracker Mode) will be displayed momentarily.
Crosshair in the center of the display will only be displayed when the
Laser Pointer (optional) is installed. Display adjustment graphics are not
displayed. In addition to the four constant graphics display (Date and
time, FLIR Logo, Az and El) only the non-selectable GPS Data graphic is
displayed constantly.
3.1.6.4
The four constant graphics, Date and time, FLIR Logo, El (Elevation) and
Az (Azimuth) position indicators are displayed. All display adjustment
and all operational Mode graphics are not displayed, only the selected
Tracker Mode is momentarily displayed. Crosshairs (bore sight) are on if
the Laser Pointer (optional) is installed.
Valid on Day of Issue only.
Document will not be updated
LLTV – When the CCD camera is in the LLTV (Low-light)
mode this symbol is displayed in the upper right side of the
display.
Manual Gain – This symbol is enabled in manual gain
mode, disabled otherwise.
cameras. This symbol is displayed in the middle left side of
the display.
Manual Level –
mode, disabled otherwise. Used for both cameras. This
symbol is displayed in the middle left side of the display.
POS Hold – Indicates that the SGA is in preset home
position. The POS Hold symbol is displayed in the middle
right side of the video display.
Symbology: FULL
Symbology: 2
Symbology: 3
Symbology: MIN
CM Ref:4049
Used for both IR and CCD
This symbol enabled in manual level
19
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard