Platform Sga Orientation - FLIR SeaFLIR II Series Operator's Manual

Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
3.2.4.1
The Orientation menu (Figure 3-17) is used to select and set the SGA
orientation (Ball up or Ball down) using the following procedure:
a. Press MENU Switch.
b. Scroll through the Top-level menu to Initial setup.
c. Press ADJ Switch.
d. Scroll through the Initial setup menu to Hardware config →.
e. Press ADJ Switch.
f. Scroll through the Hardware config menu to Orientation.
g. Press ADJ Switch.
h. Use Strain Gauge or rocker switches to select Ball up or Ball down.
i. Press ADJ Switch.
Press the EXIT Switch four times to set the SGA orientation.
Valid on Day of Issue only.
Document will not be updated

Platform SGA Orientation

Figure 3-17. SGA Platform Orientation Select
CM Ref:4049
38
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard