3307800
Step 7:
Lock the retention screw. Rotate the retention screw into the locked position.
5.4.2 Cooling Kit 2107703 Installation
Figure 5-2: Global American, INC. 2107703 Cooling Kit
A Global American, INC. AMD Socket S1 CPU cooling kit (Figure 5-2) can be purchased
separately. The cooling kit comprises a CPU heat sink and a cooling fan.
WARNING:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the [Fan model#] heat sink. The thermal
paste between the CPU and the heat sink is important for optimum heat
dissipation.
To install the 2107703 cooling kit, please follow the steps below.
Step 8:
Place the cooling kit onto the CPU. Make sure the CPU cooling fan cable can
be properly routed when the cooling kit is installed.
Step 9:
Properly align the cooling kit. Make sure its four spring screw fasteners can
pass through the pre-drilled holes on the PCB.
Step 10:
Secure the cooling kit. From the solder side of the PCB, align the support
bracket to the screw threads on heat sink that were inserted through the PCB
Page 79