Table of Contents
Advertisement
Figure 5-14: SATA Power Drive Connection
5.7.8 USB Cable (Dual Port)
The 3307800 is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1:
Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2:
Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the 3307800 USB connector.
Step 3:
Insert the cable connectors. Once the cable connectors are properly aligned
with the USB connectors on the 3307800, connect the cable connectors to the
onboard connectors. See Figure 5-15.
Page 94
3307800
Advertisement
Table of Contents
