Figure 5-11: Lpt Cable Connection - Global American 3307800 User Manual

3307800
a standard external LPT connector. To connect the LPT cable, please follow the steps
below.
Step 1: Locate the connector. The LPT connector location is shown in Chapter 4.
Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the PCIE-9452 LPT box-header connector. See Figure 5-11.
Step 3: Insert the cable
the 26-pin box-header connector on the PCIE-9452, connect the cable connector
to the onboard connector. See Figure 5-11.

Figure 5-11: LPT Cable Connection

Step 4: Attach the LPT connector bracket to the chassis. The LPT cable connector is
connected to a standard external LPT interface connector. To secure the LPT
interface connector to the chassis please refer to the installation instructions that
came with the chassis.
Step 5: Connect LPT device. Once the LPT interface connector is connected to the
chassis, the LPT device can be connected to the LPT interface connector. See
Figure
connectors.
5-12Step 0:\
Once the cable connector is properly aligned with
Page 91