Features And Benefits; Accessing The Amd Sb600 Raid Utility - Global American 3307800 User Manual

CAUTION!
Do not accidentally disconnect the SATA drive cables. Carefully route
the cables within the chassis to avoid system down time.
D.2 Features and Benefits
Supports RAID levels 0, 1, and JBOD
Supports connectivity to two disk drives
Windows-based software for RAID management
D.3 Accessing the AMD SB600 RAID Utility
To access the AMD RAID Utility, please follow the steps below:
Step 1: Connect SATA drives to the system. Connect at least two SATA drives to the
system. Make sure the drives have the same capacity, are the same type and
have the same speed.
NOTE:
Make sure the SATA drives are EXACTLY the same when they are
configured in a RAID configuration (JBOD, RAID 0 or RAID 1). If they
are not the same size, disk drive capacity is sacrificed and overall
performance affected.
Step 2: Enable SATA drives in BIOS. Start the computer and access the AMI BIOS
setup program. Next, open the Southbridge Setup menu. Enable the OnChip
SATA Channel option and change the OnChip SATA Type to RAID.
Step 3: Save and Exit BIOS. After the SATA ROM Support BIOS option is enabled,
save and exit the BIOS.
Step 4: Reboot the system. Reboot the system after saving and exiting the BIOS.
Page 116
3307800