TROUBLESHOOTING A-FGC1
Beware that when recommendations in text below is to calibrate a specific part shall always the other
needed calibrations be done according to the calibration Tree in Part II section 3.
Before starting to use this table we recommend to first find out when the problem occurred i.e. date
and time and then check into the service error log or system check error log to find which errors was
stored into the log at that date and time.
If the ADU not have been switched off there will also be valuable information stored in the User alarm
log.
Document No. 8502854
Troubleshooting A-FGC1
B-59