Cisco 7905 User Manual page 5

Transfer a Call
Blind Transfer Immediately redirects the call without allowing you to speak to the transfer recipient (the
person to whom you are transferring the call).
1. During a call, press the Trnsfer soft key. The call is placed on hold.
2. Dial the number to which you want to transfer the call and hang up your phone.
Consult Transfer Redirects the call after allowing you to speak to the transfer recipient.
1. During a call, press the Trnsfer soft key. The call is placed on hold.
2. Dial the number to which you want to transfer the call.
3. Wait for the call to be answered. Speak to recipient. Press Trnsfer button and hang up.
4. If the transfer fails, press the Resume soft key to return to the original call.
Cancel Transfer
1. To cancel your consult call transfer attempt, Press the EndCall soft key.
2. To reconnect to the original caller, Press the Resume soft key.
Transfer to Voicemail
Simply press the TrnsfVM soft key
Forward All Calls
To forward all incoming calls to another number, perform the following steps:
1. Press the CFwdALL soft key. You will hear a confirmation beep.
2. Dial the number that you want your calls forwarded to including locally required prefix numbers.
The phone display is updated to show that calls are forwarded.
3. Press the pound key(#) or EndCall soft key.
If you want to forward calls to voicemail, manually enter the voicemail number, or use the soft key and
button sequence of CFwdALL soft key plus the Messages button, followed by EndCall soft key.
Cancel Call Forwarding
Simply press CFwdAll soft key.
Activate Do Not Disturb (DnD)
For visual call alerting and information without audible ringing, use Do Not Disturb (DnD). Calls receive
normal call-forward-busy and no-answer treatment.
1. Press the more soft key to locate the DnD soft key.
2. Press the DnD soft key. A text message displays to indicate that the phone is in DnD mode.
To deactivate, repeat steps 1 and 2 in the idle state.