Contents Page: Cisco 7905/7911/7912 IP Phone Quick Reference Guide Contents Page Introduction Overview of Phone How Do I: Place a Call? Put a Call on Hold? Adjust the Handset Volume? Adjust the Ringer Volume? Use the Monitor? Operate the LCD Screen?
Introduction: This document has been written to help you get up and running with the new Cisco 7905 7911 & 7912 IP Phones. This document will show you how to make and receive a call. Change any phone settings, forward or put a call on hold and log into your Unity Voicemail box.
How Do I: How Do I? Solution Place a Call? • Lift the receiver and dial the number, • Without lifting the receiver press the NewCall soft key and dial the number, lifting the receiver when the call is answered, •...
Use the To activate the Monitor: You can use the • During a call press the Monitor soft Monitor? monitor to listen to a key and hang up the handset. (You will call. To talk on a call, be able to hear the call, but you will you must pick up the not be able to talk on the call.) handset.
Use Voice Set up voice mail: Mail? Press the Message (“Msgs” on the 7911) soft key on your Cisco IP Phone or dial 85555 and enter your PIN (12345) when prompted. Allows you to save a recorded name Set up a voice greeting Change your PIN or password.
Cisco IP Phone • After you enter the number, you will or to a traditional hear two beeps.