ESP APWIFIDS2 Installation And Operating Instructions Manual page 24

SETUP THE DOOR CHIME W/ VIDEO DOOR PHONE
Please follow the setups in case accidentally delect the doorchime in the advanced setting.
(1) Insert three pieces of AA batteries into the Door Chime.
(2) Adjust the desired volume of Door Chime by pressing the volume key on the side
of the Door Chime.
(3) Select the desired melody by pressing the melody key on the side of the Door Chime.
1
(4) Open APP and go to advanced settings, and chooes Sensor Setup, then tap
and tap Door Chime icon.
(5) Remove and reinsert the batteries into the Door Chime to start pairing process (you
have 30s to complete this action), then blue LED will flash until pairing is complete.
(6) Once the Door Chime has paired to the video door phone; Door Chime will ring with the
ringtone melody which you have chosen, showing the paring is now completed.
(7) Name your device and tap "Next" to complete the pairing.
4-1
LED indicator
4-2
Adjust volume
2
Melody selection
3
4-3
7