ESP APWIFIDS2 Installation And Operating Instructions Manual page 10

REMOTE VIEW DOOR PHONE SETUP & INSTALLATION
BEFORE YOU START
• Do not mount the RVDP until completing the Wi-Fi connection setup.
• Install the RVDP where is can receive excellent Wi-Fi network signals. Under weak Wi-Fi
signal environment, install the RVDP by using Ethernet cable.
• First connect power to the RVDP using the supplied Power Input Cable to 9-48V power
source.
• After supplying power, the boot up process will begin (> 2 minutes), the circle LED will
Water-resistant
cover
Red
8
.
Power cable
Black