Technical Summary; Brief Description; Overview; Applications - Optical Systems Design OSD2184P Operator's Manual

1 TECHNICAL SUMMARY

1.1

BRIEF DESCRIPTION

1.1.1

OVERVIEW

The OSD2184P is a 3-port industrial ethernet switch offering Power over Ethernet meeting the latest
IEEE802.3bt PoE specification with continued support for devices requiring IEEE802.3af/at and
HDBase-T (PoH) PoE. Each of the two RJ45 ports is capable of providing 90W of power with a total
power budget of 170W. This allows the latest PoE devices such as IP cameras, Wireless Access Points,
microwave links and VOIP phones to be easily connected to your network. With a compact design the
OSD2184P can easily be mounted inside a network enclosure or a Smart Pole using the DIN rail or
wall mounting brackets provided. Additionally, the OSD2184PW version can be powered from a
12VDC to 57VDC supply. A rugged IP30 casing, fan-less design and wide operating temperature range
from -40 to +75ºC make this product ideally suited for use in a wide range of harsh industrial
environments.
1.1.2

APPLICATIONS

▲ Any network utilising a mix of copper
and fiber
▲ Networks using Power over Ethernet
devices such as cameras, intercoms,
access control, telephones, etc.
1.1.3

FEATURES AND BENEFITS

▲
Complies with
IEEE802.3i/802.3u/802.3ab
10/100/1000Base-T, IEEE802.3u 100
Base-Fx, IEEE802.3z 1000Base-
Lx/Sx standards
▲
Has two fixed 10/100/1000Base-T
copper ports and one
100Mbps/1000Mbps SFP port
▲ Auto MDI/MDIX on copper ports
(support both straight through and
crossover cables)
▲ Can be used with either singlemode or
multimode fiber over a variety of link
budgets
▲
Complies with the IEEE802.3af/at/bt
and HDBaseT PoH standards
▲ Provides up to 90W to each RJ45
port, up to 170W in total
▲ User selectable PoE mode setup
PAGE 6
OPTICAL SYSTEMS DESIGN
OSD2184P OPERATOR MANUAL
▲ Industrial IP communications
▲ Gigabit Ethernet networks
▲ Web browser based Graphical User
Interface (GUI)
▲ Available for operation over 1 or 2
fibers
▲ Powered by non-critical 48 to 57VDC
supplies for OSD2184P or 12 to
57VDC for OSD2184PW (voltage
booster version)
▲ Operates over the temperature range
of -40 to +75°C.
▲ PoE mode setting from GUI or Push
Button
▲
Remote PoE on/off control and status
monitoring
▲ Supports 10KB jumbo frames.
▲ SFP module sold separately.
▲
DIN rail or surface mounting.
DOC ID: 10119601