Table of Contents
Advertisement
Cleaning the gaps between the Washlet main unit and the toilet
(About once a month)
● The main unit can be removed to clean the upper surface of the toilet and the lower surface of
the main unit.
Unplug the power cord
❈ Before removing the main unit, please be certain to
remove the plug for the automatic toilet flushing function.
Additionally, please make sure that no water gets on the
plug for the automatic toilet flushing function.
Remove the main unit
● With the main unit release button on the right side of the
main unit pressed, please pull the main unit forward.
❈ Please do not pull with excessive force because of the
water supply hose and the power cord.
Clean the area
● Please clean within the guidelines offered under "Daily
Care and Maintenance" on page 25.
Attach the main unit
Align the centers of the main unit and the base plate.
1
2
Slide the main unit along the surface of the toilet and
press all the way into place until a "click" is heard.
3
Press the automatic toilet flushing function plug into the
main unit.
❈ At that time, please make certain that the plug is not wet.
❈ If the main unit is not securely on the base plate, the
Washlet will not function.
Other care and Maintenance
Cleaning and inspecting the power supply plug
● Please check the power supply plug around once a month to make sure that it is in proper
working condition.
Unplug the power cord
Clean
● Please remove any dust that is on the blades of the plug
using a dry cloth.
Plug the power cord in
● Please plug the power cord in securely, all the way to the
base.
28
Cleaning the deodorizer filter (About once a month)
● If an odor is smelled, please remove the main unit and clean the deodorizer filter.
Remove the deodorizer filter
●
Please press on the clip at the end of the filter
and pull it forward.
Clean
●
Use a toothbrush or similar implement to
remove dust on the filter.
Attach the deodorizing filter
●
Hook the left side of the filter onto the main unit and
slide the filter securely until you hear the clip "click."
❈ Never use the Washlet without a filter. (It could cause
malfunctions.)
Cleaning the wand
● The wand can be extended without spraying warm water, which makes cleaning easy.
Extend the wand
● Please press the
button on the remote
control.
The wand will extend.
● After about five minutes the wand will store itself
automatically.
Clean
● Please wipe away any dirt with a soft cloth.
❈ Please do not pull the wand with excessive
force or push against it.
(Otherwise, malfunctions could result.)
Store the wand
● Please press the
button again.
The wand will store itself and then
wash itself automatically.
1
Cleaning the filter.
● The filter can be washed in water, but please remove any moisture before replacing it.
We recommend replacing the filter when it becomes soiled or blocked.
Water will spray from the base of the wand as part of the cleaning process.
2
1
2
29
Hide quick links:
Advertisement
Table of Contents
