Table of Contents
Advertisement
Prevention of damage due to frozen
water pipes
When freezing is anticipated
Please warm the bathroom interior when the ambient temperatures are expected to be sub-freezing. Or, when that is
not possible, please remove the water from the system.
When there is risk of freezing, please prevent it by taking the following steps.
If the product freezes, the unit could be damaged, resulting in leaks.
Before doing any freeze prevention
Please take
measures, please close the toilet seat and
note!
lid.
Water removal
1
Removing water from the toilet tank
Turn off the water supply by turning off the water shut-off valve and the junction valve.
1
● Please turn off the junction valve with a flathead screwdriver.
2
Turn the toilet tank lever and remove the water from the low tank.
2
Removing the water from the hoses
Push the
button on the remote
1
control. (Remove the residual water in the product
interior.)
2
Open up the cover (grey) using a flathead
screwdriver.
3
After loosening the water drain valve (with water
filter) using a flathead screwdriver, pull it out.
Caution
Do not remove the water drain valve
(with water filter) while the water
shut-off and junction valve are open.
Prohibited
● Otherwise water will spray out.
4
Make the water supply hose horizontal and
remove the water from inside the hose
(approximately 1 oz. (30 ml)).
1
When freezing temperatures are anticipated
Please do not use the power saving features. The product could be damaged by freezing.
See Page 22 about stopping the timer power saver. See Page 23 about stopping the auto power saver.
Please keep the toilet tank lever turned until the toilet tank water has completely emptied.
2
32
1
Shut off the
and
and then close off the toilet seat and lid.
2
5
Press the
button once more.
(The wand will retract.)
Push the water drain valve (with water filter) into
6
place and tighten securely with a flathead
screwdriver.
Caution
Tighten the water drain valve (with
water filter) securely.
● If not tightened securely, there
Mandatory
could be leaks.
7
Replace the cover (Grey)
3
Keeping the Washlet interior warm
Be sure that the
button is set to "on" and that the toilet seat temperature setting on the remote
1
control is set to "high."
Close the toilet lid.
2
Procedure for long periods of disuse
● When not using the Washlet for extended periods, changes in the water could cause skin
inflammation. There is also a chance that the product could freeze, so please remove the
water.
Removing the water
1
Remove the water in the toilet tank.
2
Remove the water in the hoses.
3
Unplug the power cord
❈ Please be sure to unplug the power cord before removing the
main unit of the Washlet from the toilet.
4
Remove the Washlet main unit
See Page 28 for removal of the main unit.
❈ Please place the Washlet on top of the toilet at the front.
■ When leaving a site for the winter
3
■ When using at a cabin or other location
Please remove the water! There can be severe cold spells during wintertime absences.
Please be sure to remove the water in order to avoid freezing.
3
Page 32
Pages 32 to 33
33
Hide quick links:
Advertisement
Table of Contents
