Included Parts; Care & Cleaning; Installation Procedure - Toto Connelly TS221T Installation And Owner's Manual

1/2” thermostatic trim
Table of Contents

Advertisement

Available languages

Available languages

Check to make sure that all these parts were included in your packaging:
Escutcheon *
Temperature Limit Stop
* Actual product may vary in appearance depending on the model.
TS221T shown.
Your new shower trim is designed for years of trouble-free performance. Keep
it looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure to
follow these instructions may void your warranty.
1.
Confirm that the valve has
been installed properly.
NOTE: The finished wall
surface should be between the
min and max markings on the
plaster guard. See the TSST
installation manual for further
information.

INCLUDED PARTS

Set Screw & Hex Wrench
CARE & CLEANING

INSTALLATION PROCEDURE

Sleeve
Plaster Guard
Finished Wall
3
Handle Assembly *
REQUIRED - NOT
INCLUDED
Valve with Plaster Guard
TSST
Max 95mm (3-3/4")
Min 65mm (2-1/2")
Thermostatic
Valve

Advertisement

Table of Contents
loading

Table of Contents