Table of Contents
Advertisement
Caring for your Washlet
Before cleaning the Washlet
Each component can be disassembled for a thorough cleaning.
Caution!
Be sure to turn off the
and
24
®
®
before cleaning the unit.
Daily care and maintenance
Cleaning the Washlet, toilet seat and lid
Wipe with a soft, damp cloth.
Please dampen a soft cloth with water and wipe these
surfaces after wringing well.
1, 2
Please note!
The toilet seat and lid can be removed easily so that
they can be cleaned thoroughly.
The use of excessive force during cleaning can
cause the toilet seat or lid to come off.
If the toilet seat or lid comes off, please refer to
Page 27 to reattach them.
When very dirty....
Please wipe down with a soft cloth, using a
diluted kitchen detergent (neutral alkalinity).
Please wipe down with water after that.
If there is toilet cleaner on the Washlet or
seat surface...
Please dampen a soft cloth with water and
wipe up the drops.
Please note!
When using harsh toilet bowl cleaners...
When using detergent or disinfectants for toilets inside the toilet, please leave the toilet seat and
toilet lid open and clean the Washlet surfaces quickly (within three minutes).
Additionally, please wipe away all trace of detergent from the toilet itself.
(Vaporized gas from detergents used on toilets can get inside the Washlet and cause
malfunctions.)
1
The product is made of plastic, so please do not wipe the surfaces with a dry cloth or toilet paper. Doing
so can cause scratches.
The Washlet is an electrical product. Please be very careful not to let water get inside it. Please wipe
detergent away completely so that no residue remains in the gaps between surfaces.
Please keep the seat sensor, person detection sensor and the remote receiver clean! Many of the functions
2
will not work if these become dirty. Pages 15, 18 and 35 through 41.
25
Hide quick links:
Advertisement
Table of Contents
