Setting Mowing Height; Use And Adjustment Of Load Reducing Chain - SaMASZ KT 261 Operator's Manual

KT 340 and KT 340 H (narrow swath)
Disc
without
drum
NOTE: The operator can set the width of the windfall by replacing discs without drums with discs
with drums

6.4. Setting mowing height

The desired mowing height is set by changing the length of the
upper regulated tie S (Fig. 12) of the suspension. Extending the tie
results in increasing the mowing height and shortening – in decreasing
the mowing height. The current mowing height is indicated by the
indicator located on the linkage frame (Fig. 27).
Recommended mowing height is 2.5" - 2.75".

6.5. Use and adjustment of load reducing chain

a)
Fig. 28a. Load reducing chain
Operating manual
Disc with
drum
Fig. 26. Swath widths of SaMASZ rear disc mowers
B
A
Rear disc mower with central suspension
- hydro-pneumatic or spring suspension
Fig. 27. Mowing height indicator
~1' 5" - 1' 8"
b)
Fig. 28b. Mower height in working position
- 3 9 -