Bearings - SaMASZ KT 261 Operator's Manual

A

7.4. Bearings

Every 50 hours of the mower's operation, lubricate bearing beds of conditioner/rollers shaft
(Fig. 40 - 42). The manufacturer-recommended lubricant is ŁT43 grease or other equivalent
lubricant for rolling and sliding bearings which operate in temperature range of -30° and +130°C.
Fig. 40. Point of lubrication with ŁT43 grease for non-locating bearing – in mowers with swath rollers
Operating manual
B
C
Fig. 39. Roller conditioner's gearbox lubrication points
Lubrication
point
Rear disc mower with central suspension
- hydro-pneumatic or spring suspension
A
Lubrication
point
- 4 7 -
B
C