Page 2
+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu Elation Professional Mexico | AV Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000 +52 (728) 282-7070 D O C U M E N T V E R S I O N...
C O N T E N T S General Information Limited Warranty (USA Only) Safety Guidelines Fixture Overview Installation Guidelines Optional Snoot Installation System Menu DMX Channel Functions And Values Error Codes Maintenance Guidelines Specifications Optional Accessories...
Page 4
BOX CONTENTS Omega Brackets (x2) Neutrik powerCON Power Cable CUSTOMER SUPPORT Contact ELATION Service for any product related service and support needs. Also visit forums.elationlighting.com with questions, comments or suggestions. ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST 323-582-3322 | Fax 323-832-9142 | support@elationlighting.com...
No accessories should be shipped with the product. If any accessories are shipped with the product, Elation Professional shall have no liability what so ever for loss and/or or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the product serial number and/or labels are altered or removed;...
Page 6
This fixture is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. Elation Professional is not responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual.
S A F E T Y G U I D E L I N E S DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before serving. DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
Page 8
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local Elation dealer.
I N S T A L L A T I O N G U I D E L I N E S FLAMMABLE MATERIAL WARNING Keep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations. USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE POWER CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER OUTPUT ON THIS FIXTURE.
Page 11
I N S T A L L A T I O N G U I D E L I N E S OMEGA BRACKET INSTALLATION Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the Omega Brackets to the fixture by turning each quick-lock fastener ¼...
I N S T A L L A T I O N G U I D E L I N E S POWER LINKING USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE POWER CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER OUTPUT ON THIS FIXTURE.
S Y S T E M M E N U The fixture comes with an easy to navigate system menu. The control panel (see image below) located on the front the fixture provides access to the main system menu and is where all necessary system adjustments are made to the fixture.
Page 14
ELATION FUZE WASH Z350™ - SYSTEM MENU Supports Software Versions: ≥1.15 | 2.16 Features subject to change without notice. MAIN SUB MENU OPTIONS / VALUES DESCRIPTION (Default Settings in BOLD) MENU Receive DMX Address Setting 001 ~ XXX Address 15CH RGBW, 16CH HSI, 17CH sRGBI,...
Page 15
ELATION FUZE WASH Z350™ - SYSTEM MENU Supports Software Versions: ≥1.15 | 2.16 Features subject to change without notice. MAIN SUB MENU OPTIONS / VALUES DESCRIPTION (Default Settings in BOLD) MENU Reset. M Pan&Tilt Reset of Pan/Tilt Motors Test. Chan Test Functions Panel.
Page 16
Function - Dim Curve Select desired DIMMER MODE (Standard, Stage, TV, Architectural, Theatre). Test – Calibrate ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION This function allows small adjustments to be made to the effect wheels to compensate for ware or in the event a sensor has been knocked slightly out of place. Because improper use of this function can result in undesired operation this function has been password protected.
E R R O R C O D E S When power is applied, the unit will automatically enter a “Motor Reset” mode, which brings all the internal motors to a home position. If there is an internal problem with one or more of the motors, an error code (see below) will flash on the control display.
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local Elation dealer.
S P E C I F I C A T I O N S SOURCE 350W RGBW COB LEDs 100,000 Hour Average LED Life* *May vary depending on several factors including but not limited to: Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming. COLOR RGBW EFFECTS...
Page 25
DIMENSIONAL DRAWINGS Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without notice.
Page 26
DIMENSIONAL DRAWINGS - Optional Snoot Installed Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without notice.
ITEM FW350SNOOT FUZE WASH Z350 Snoot TRIGGER CLAMP Heavy Duty Wrap Around Hook Style Clamp DRC350FUZE FUZE WASH Z350 Quad Road Case AC3PDMX5PRO 5 ft. (1.5m) 3pin PRO DMX Cable AC5PDMX5PRO 5 ft. (1.5m) 5pin PRO DMX Cable PLC3 3 ft. (1m) PowerCON PRO Link Cable...
Need help?
Do you have a question about the Fuze Wash Z350 and is the answer not in the manual?
Questions and answers