Elation FUZE WASH FR User Manual page 13

I N S T A L L A T I O N G U I D E L I N E S
OMEGA BRACKETS INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making sure
the fastener is completely locked. Omega Brackets can be installed into the fixture base as
illustrated below.
1
Omega Bracket
ALWAYS ATTACH A SAFETY WHENEVER INSTALLING THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT FALL IF THE CLAMP FAILS.
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included Omega Brackets using an M10 screw fitted through the center hole
of the Omega Brackets. The fixture provides built-in rigging points for a SAFETY CABLE (not
included). Be sure to only use one of the designated rigging points for the safety cable and never
secure a safety cable to a carrying handle.
RIGGING
Overhead rigging requires extensive experience, including amongst others calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the fixture. If you lack these qualifications, do not attempt the installation yourself.
Improper installation can result in bodily injury.
2
Clamp
S A F E T Y C A B L E
5
3
Safety Cable
1 3
4
6