Table of Contents
Advertisement
S Y S T E M M E N U
MAIN MENU
DMX Presets
DMX Channel
Mode
DMX Setting
No DMX
Status
Primary
Secondary
Status
Settings
Fan Settings
Dim Mode
Personality
Dim Curves
LED Refresh
Rate
Reset Motors
Display
Temp Unit
Service
ELATION FUZE WASH FR
Default setting shown in bold
Supports Software Versions:
OPTIONS / VALUES (Default Settings in BOLD)
A001~AXXX
Standard, Extended, CMY, CMY Extended
Blackout
Hold Last
Internal Programs
ON/OFF
ON/OFF
Pan Invert
Tilt Invert
Pan/Tilt Feedback
Pan Degree
Pan/Tilt Speed
Hibernation
Auto
High
Low
Studio
Mute
Standard
Stage
TV
Architectural
Theatre
Stage 2
Dim Speed
Linear
Square
Square Inverse
S-Curve
900, 910, 920, 930, 940..., 1200, 1210, 1220,
1230..., 1500, 2500, 4000, 5000, 10K, 15K, 20K,
25KHZ
Reset All Motors
Pan/Tilt Reset
Focus and Zoom reset YES/NO
Other motor reset
Screen Saver Delay
Touch Screen Lock
Rotate Display 180° YES/NO
C/F
Passcode
≥
1.04
ON/OFF
ON/OFF
ON/OFF
630/540
Speed 1~4
OFF, 01M~99M, 15M
0S~10S
YES/NO
YES/NO
YES/NO
01M~10M/OFF
OFF/ON
Pan 000-255
Tilt 000-255
Calibration
Red 000-255
...
USB Software
YES/NO
Update
Factory
YES/NO
Restore
1 6
DESCRIPTION
Used to set the units desired DMX
mode.
Used to set the units desired DMX
mode.
Blackout option shall take all
channels to zero (0) when signal is
lost.
Hold Last shall be the default setting
and unit shall hold all last channel
values received from the console
when signal is lost.
Internal Programs option shall take
all channels to the last set Internal
Programs channel settings when
signal is lost.
When DMX signal is not present for
the set time, the unit shall go into
standby mode after the set time.
When set to OFF, unit shall never go
into hibernation mode. The unit
should have 01M to 99M options... so
01M, 02M, 03M... 99M (M=Minutes).
15M should be default.
Advertisement
Table of Contents
