Led Sighting (Sighting Option D); Figure 36: Led Spot Size Indication - Fluke Endurance Series User Manual

8.3. LED Sighting
The LED sighting allows fast and easy aiming at targets, which have to be centered in the
measurement spot. The LED is specially aligned with the sensor's lens to provide accurate,
non-parallax pinpointing of targets. The LED comes as a small, bright green spot, which
indicates the whole dimension of the measurement area.
1.800.561.8187
(Sighting Option D)
LED dot

Figure 36: LED Spot Size Indication

To preserve LED longevity, the LED automatically turns off after approximately
10 minutes of constant use!
Warning
Avoid exposure to LED light! Eye damage can result.
Use extreme caution when operating! Never look direct into the LED beam.
If LED Sighting is activated, avoid looking through the Visual Sighting Port of
the Control Panel, because mirror and dispersion effects can injure eyes.
www.
Measured spot at the inner of the circle
Spot marker
.com
Options

LED Sighting (Sighting Option D)

information@itm.com
47